Blogs
Home » Blogs

foaming extrusion

foaming extrusion
  • 2021-10-14

    According to the different density, PET foam can be divided into low-density PET foam products and high-density PET foam products. Generally, foam with a density below 100kg/m³ can be considered low-density foam. The current minimum density can be around 60kg/m³, and the density of high-density foam

  • 2021-05-10

    At 2021 Chinaplas, Nanjing Chuangbo Machinery Co., Ltd. launched a complete set of supercritical carbon dioxide foaming extrusion line and continuous fiber reinforced thermoplastic unidirectional prepreg sheet production line.

  • 2021-03-08

    Supercritical co2 assisted tandem line is made for both grafting process and foaming. This line consists of mixer, loader, loss-in-weight feeder, twin screw extruder, single screw extruder, CO2 gas feeder, screen changer, water cooling strand pelletizing, melt pump, and static mixer.

  • 2020-12-09

    Nanjing Chuangbo provides extrusion foaming equipment for New Material R&D Center set up jointly by China Construction Research Institute and Anhui Dongyuan

CALL US
  Mobile/Whatsapp/WeChat: +86-18963614800
anderson@njchuangbo.com
No.111, Xinnengyuan Road, Economic Development Zone, Lishui District, Nanjing, Jiangsu Province, P.R.China (211215)

DEVOLATILIZATION & DEWATERING

FOAM EXTRUSION

LFT EXTRUSION

CFRTP

INDUSTRIES

LEAVE A MESSAGE

FOLLOW US

Copyright © 2019 Nanjing Chuangbo Machinery Co., Ltd. All Rights Reserved.